Raymarine RSW Wired - Smart Performance Wind Transducer - Short Arm w/30M Cable [E70670]

$849.99

$793.99

  • Availability: 4 In Stock

MOST ITEMS SHIP FROM WAREHOUSE NEXT DAY!*

AFFORDABLE PRICING FOR QUALITY PARTS!

RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M Cable

The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard.

Install & Go!

Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up. 

Finely Tuned

Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent.

Sail Smarter

Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter.

Specifications:

Length    

  • Wind transducer (including cable): 657.762 mm (25.90 in)
  • Wind transducer (excluding cable): 540.712 mm (21.29 in)
  • Wired gateway: 155.61 mm (6.13 in)

Width    

  • Wind transducer: 46.96 mm (1.85 in)
  • Wired gateway: 47.38 mm (1.88 in)

Height    

  • Wind transducer: 305.86 mm (12.04 in)
  • Wired gateway: 30.61 mm (1.21 in)

Power

  • Nominal supply voltage: 12 V dc (via SeaTalk NG)
  • Operating voltage range: 9 V to 16 V dc
  • Power Consumption: < 100 mW
  • Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse
  • NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1

Environmental

  • Operating temperature range: -25°C to +55°C (-13°F to +131°F)
  • Storage temperature range: -30°C to +70°C (-22°F to +158°F)
  • Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C
  • Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3
  • Wind: 115 mph (185 kph)
  • Vibration: EN 60945:2002 (exposed)

What's In The Box?

  • No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer)
  • No.7 x 3/4" self tapping screws x 2 (for mounting the gateway)
  • 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable)
  • Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)
  • Mast cable, 30 m (98.43 ft) reel
  • Documentation
  • Wind transducer
  • Smart wind-wired gateway
  • SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

Thank you for choosing Seaman Marine!

FITMENT: 

If you are unsure of your Part Number before ordering, please CONTACT US before placing your order and we will happily assist you!

 

AVAILABILITY:

Most of the parts we sell are always in stock. In the rare event that the item is not in stock, or on backorder we will issue you a full refund.

 

SHIPPING:

SHIPPING CHARGES ARE ADDED AT CHECKOUT.

FOR EXPEDITED SHIPPING OPTIONS, INTERNATIONAL SHIPPING, OR SHIPPING TO ALASKA OR HAWAII, PLEASE CONTACT US.

*IF YOU ARE LOCAL TO OUR WAREHOUSE IN MOBILE, ALABAMA, PICKUP IS AVAILABLE BY APPOINTMENT ONLY!*

 

WARRANTY:

IF YOU ARE PURCHASING A POWERHEAD, LOWER UNIT, OR ANOTHER COMPLETE UNIT THAT STATES IT COMES WITH A WARRANTY, PLEASE VISIT OUR WARRANTY PAGE FOR ALL INFORMATION.

 


CALIFORNIA CUSTOMERS: Please visit https://www.p65warnings.ca.gov for information regarding California's Prop 65 Warning.


See our Policy Page for all information.

We appreciate your business!

 

SEAMAN MARINE

Recently Viewed Products